Calibration Leak

INFICON calibrated test leaks enable to test and to calibrate the Helium sniffer leak detector Protec P3000(XL)  and XL3000flex for the highest quality demands in leak detection. The handling of the test leaks and the calibration of the sniffer leak detectors is very easy.

Various types with different leak rate ranges:

• Capillary leak with helium gas reservoir and manual valve 
• Leak rate range 10 E-7 mbar l/s
• Connecting flange DN10KF

• Permeation leak with helium gas reservoir and 

INFICON calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection. The handling of the test leaks and the calibration of the sniffer leak detectors is very easy.

INFICON calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection. The handling of the test leaks and the calibration of the sniffer leak detectors is very easy.

To be able to correctly accept/reject test objects you need to measure to a set standard. You also need to calibrate your leak detector against a reliable reference leak. INFICON reference leaks for Sensistor industrial hydrogen leak detectors cover a wide range of leak rates to suit your specific application and include bigger leaks (Types A-C) and smaller leaks (Types E and G).

Manufacturers of helium leak testing systems require calibrated leaks of various sizes with individually adjusted leak rates for the purpose of setting up and calibrating their systems.

Depending on the type of application, these calibrated leaks are either installed in the test sample as a master leak or are installed in the test chamber itself.