Share:
Helium bombing is part of the leak test process for hermetically sealed components which have an internal cavity like transistors, diodes or small relays. These parts are placed in a chamber containing pressurized helium, allowing the helium to penetrate the parts. The part is then tested in a vacuum chamber connected to the leak detector. Important considerations include pressurization time, helium bombing pressure, internal volume and leak size.
Clamps are controlled by high air pressure amplified by pressure booster
Locking mechanism of the chamber by 3 sets of pneumatic clamps
Optical sensors ensure safety of work when open/close the chamber
Clamps are controlled by high air pressure amplified by pressure booster
Locking mechanism of the chamber by 3 sets of pneumatic clamps
Optical sensors ensure safety of work when open/close the chamber
Inquiry - Helium Bombing System
View more
Leak Test
Minimize operating cost
Reduce dependancy on fluctuations in Helium supply on the world market
Standalone system
Compliance with environmental regulations
Fully automated
High recovery rate up to 95%
Easy to maintain
Reduce dependancy on fluctuations in Helium supply on the world market
Standalone system
Compliance with environmental regulations
Fully automated
High recovery rate up to 95%
Easy to maintain
System to handle vacuuming, Helium charging and reclaim process for test parts.
Customised design fixture to ensure maximum sealing of test part while leak test
Fast and efficient with automatic test process
Non operator dependant to eliminate human error
Auto-calibration with reference leak traceable to international standard
Fast and efficient with automatic test process
Non operator dependant to eliminate human error
Auto-calibration with reference leak traceable to international standard
